Serpento ASPID 150, Руководство пользователя / Техническое обслуживание

Страница: 64 / 84

MANUAL DEL USUARIO
• ASPID 150
23
5. Correct running operation
Start the Engine
Check if the fuel switch is Set to “ON” position. Insert the key into the ignition switch and turn clockwise to ON. If the transmission system is in
neutral mode Currently, the neutral indicator Should be lit.
CAUTION
When starting the engine, the ge¬arshift Should be in neutral mode andthe clutch switched on, and the ridersits on the correct
position.
Open the cold start devices completely, close the choke valve of the carburetor and start the vehicle by pressing the power button. Close the
cold start devices in half until the engine is hot; then return them to their initial (completely closed) position. In cold weather the engine may
require longer to warm up.
When the engine is hot
1. The ignition switch is in the ON position
2. Accelerate and keep the rpm at 1/8 or 1/4 of its maximum capacity.
3. Turn the engine start lever treading
Be careful
When the engine starts to regain control of the throttle.