Serpent SRX2 GEN3 CARPET, Инструкция по эксплуатации

Страница: 21 / 44

21
STEp 31
M2.3x4
M2.3x4
M3x14
2
3
4
5
6
1
FR
RR
FR
RR
FR
RR
A
B C
SIMPLIFIED EXPLANATION OF SUSPENSIONSION INSERTS
Example A: RR FR toe block inserts are 0°, RR RR toe block inserts are also 0°. This instance will produce 3°
toe in and 1° anti-squat. This is default setting.
Example B: RR FR toe block inserts have been changed to centered 0.5° UP. The inserts in the RR RR toe
block remain 0°. This will produce 3° toe in and 1.5° anti-squat.
Example C: RR FR toe block inserts remain 0°. The RR RR toe block inserts have been changed to 0.5°
centered inward. This will product 2.5° toe in and 1° anti-squat.
SUSPENSION INSERTS
Below is a diagram of every possible orientation of the compete 7 inserts system. You are able to
move 0.5 or 1 degree in any direction from center. We also have 2 special inserts to fill 0.5° left
and right offset, by 1° height, as seen in the diagram. Depending on your setup, the range of toe
in is 1°, up to 5°. The anti squat range is -1 (pro Squat) up to 3° anti-squat.
The default is centered inserts in both the FR FR toe block and RR RR toe block. This produces
3° toe in and 1° anti squat.
M3x14
FR
RR