Serpent Cobra SRX8 GT, Руководство пользователя

Страница: 18 / 58

18
STEp 24
After building the differential with new gears, new
differential case and bearings, the diff may feel a
little tight.The connected parts need at least an
hour run-time to create a perfect match. Attention:
When you assemble the diff with too much initial play, the
gears will not run-in properly and may wear quickly. After
1 or 2 hours of running the car, re-check the gear-mesh
between the ring gear and the pinion. All parts should have
run-in properly now. You may add or remove 8x11x0.1
shims as needed.
8x16x5
8x11x0.2
5x13x4
M5x4
1
2
3
24.2 24.1
8x16x5
5x13x4
M5x4
8x11x0.2
INDRIVE BRACKETS CHART
LOW MID LOW MID HIGH HIGH
Assemble the indrive bracket accordingly to the diff insert
assert mouted in the step 18.
M2.5x4
M2.5x4