Serpent Cobra SRX8 GT, Руководство пользователя

Страница: 26 / 58

26
clutch assembly
STEp 37 STEp 38
BaG 12
Before to assemble clutch shoes, carefully remove the red area and smoothen
the cut surface in order to have four clutch shoes with the same shape.
1- To align the clutchgears with the 2-speed gears,
it may be needed to use shim(s) 6x8x0.5mm (for
6mm shaft) or 7x8x0.5 (for 7mm shaft) behind the
cone. This you can see only after assembling the
clutch.
2- The holes in the side of the flywheel can be
used to block the flywheel (with short allen tool)
through the bottom of the chassis, when the
engine/clutch is mounted in the car. It’s easier to
tighten or loosen the pre-load on the clutch spring
that way.
38.1
38.2