SHANGHAI SERMATEC ENERGY TECHNOLOGY CO.,LTD
- 38 -
alarm
Too low
2.Shut down at night or
when not under load
System no
output
Circuit protection or
output circuit
disconnected
1.Find the break point
and connect
2.Check for screen fault
indication
The circuit
breaker trips
repeatedly
The load is
short-circuited
1.Check the load until
short-circuit or
short-circuit connection is
found
2.If not, contact the
warranty department
Remote
inaccessible
No communication
signal
1.Check external network
The battery
system is
flooded
Not working
properly, leakage in
the system
1.Slight malfunction,
contact the warranty
department
2.Change the installation
site
After system
power supply,
the host
machine does
not work or
restart
continuously
Power Supply is not
supplied
The supply voltage is
too high, resulting in
power failure
Replace the power supply
of the system
Change the Master board
whose power supply has
been damaged
