16
SP25VDE OM 2.0-1(2006)
4.
Undocking and Docking.
The SeriPrinter is physically attached to the Digital Duplicator. This is called
the docking mechanism. In order to release the docking mechanism there is a
button located on the rear panel of the SeriPrinter on the side where the ma-
chines are docked. Press this button firmly and
pull the Digital Duplicator
away from the SeriPrinter.
The SeriPrinters height will have been set using its adjustable legs.
Therefore the wheels will not be on the ground. If the SeriPrinter is
pulled or pushed away from the Digital Duplicator the legs could be
damaged or broken.
In order for a Digital Duplicator to be docked correctly onto a SeriPrinter the
height of the SeriPrinter must be adjusted correctly. Ensure this procedure is
done by a trained service technician.
