12
SP25VDE OM 2.0-1(2006)
WHERE TO PUT THE SERIPRINTER.
Your machines’s location should be carefully chosen because environ-
mental conditions greatly affect it’s performance.
Environmental Conditions
Optimum environmental conditions
Caution
• Keep the equipment away from humidity and dust. Otherwise a fire or
an electric shock might occur.
• Do not place the equipment on an unstable or tilted surface. If it top-
ples over, it could cause injury.
Caution
• If you use the equipment in a confined space, make sure there is a
continuous air turnover. Alternatively, an extraction tube can be fitted
to vent the SeriPrinter exhaust outside the building.
• Make sure to locate this machine in a large well ventilated room that has an air
turnover of more than 30 m³ / hr / person.
• Temperature: 10 - 30 °C, 50 - 86 °F
• Humidity: 20 - 90 % RH
• The machine must be level within 5mm, 0.2” both front to rear and left to right.
Environments to avoid
• Locations exposed to direct sunlight or strong light (more than 1500 lux).
• Locations directly exposed to cool air from an air conditioner or heated air
from a heater.
• Places where the machine might be subjected to frequent strong vibration.
• Dusty areas.
• Areas with corrosive gases.
