SLK-S502 Serial server instruction manual
WEB
：
：
6
Chapter 2 Parameters configuration
2.1 Preparation before serial port server configuration
Connect one of the LAN ports of the serial server directly to a computer or to a switch. Before logging
in to the Web setting page of the serial server, you need to make sure that the management computer has
an Ethernet card installed.
2.1.1 Set a static IP address.
Please set the IP address of the management PC (for example, set it to: 192.168.0.185) and the IP
address of the device's LAN port in the same network segment (the initial IP address of the device's LAN
port is: 192.168.0.233, and the subnet mask is 255.255. 255.0).
Start>>>Settings>>>Control
Panel>>>Network&Internet>>>Ethernet>>>Network
and
Sharing
Center,Modify as follows
：
