WiSnap User Manual 2.21 04112011-JF
Page
24
of
66
set wlan rate <value>
sets the wireless data rate. Lowering the rate increases the effective
range of the WiSnap module. The value entered is mapped according
to the following table:
Value
Wireless Data Rate
0
1 Mbit/sec
1
2 Mbit/sec
2
5.5 Mbit/sec
3
11 Mbit/sec
4 - 7
Invalid
8
6 Mbit/sec
9
9 Mbit/sec
10
12 Mbit/sec
11
18 Mbit/sec
12
24 Mbit/sec (default)
13
36 Mbit/sec
14
48 Mbit/sec
15
54 Mbit/sec
set wlan ssid <string>
sets the WLAN SSID to associate with. 1-32 chars.
NOTE:
If the passphrase or SSID contain SPACE (‘ ‘)
characters, these can be entered using substitution via the “$”
character.
For example, if the SSID of the AP is “yellow brick road”
You would enter “yellow$brick$road”
Using the ‘get w” command will properly display the value:
SSID=yellow brick road.
set wlan window <value>
sets the IP maximum buffer window size. Default is 1460 bytes.
