www.SereneLifeHome.com
8
STEP 5
Hardware Needed:
• With at least one adult on each side of the table, align the table top U-Beam
with the Black Strut Tubes on the Table Base. In an even and controlled
manner, lower the Table Top to avoid misalignment while attaching to
the Table Base.
• Make sure the pre-drilled holes on the U-Beam line up with the pre-drilled
holes on the Black Support Beam. This is important for a later step.
• Continue on to next step. Once complete with Step 8, you will repeat
steps 5-8 for the other table top
Table Tennis Table Top 2.PCS
P1
WARNING:
• At least (2) to three (3) adults are
required for the following steps.
•
DO NOT
attempt to assemble alone,
as this may lead to serious injury.
•
DO NOT
open the table to playing
position until all support beams and
hinges are attached to table frame.
•
DO NOT
leave table unattended in
standing position. Table could be
knocked over, causing serious injury
or property damage.
ASSEMBLY TIP:
if there are three
(3) assemblers, have two lift the
table with one guiding the table
onto the tubes.
