www.SereneLifeHome.com
16
Adjustment and operation
Remote control operation
Single button mode remote control:
OPEN/CLOSE/STOP
of main engine are
controlled by one button circularly on the remote control.
Add extra remote control (remote control learning):
Remove the main engine housing, then take out the upper cover of the control
box, press the learning button AN1 on the control board, and indicator light LED2
will flash. Press the button that to be learned on the remote control once, The LED2
will be off. Press the same button on the remote control twice, the LED2 will flash
several times and be off; remote control learning complete. A maximum of 25
remote controls can be learned.
Delete remote control:
To delete remote control that have been learned: press and hold the learning
button AN1, the indicator light LED2 will be on; Then release it until LED2 is off.
After the steps, all the matched remote controls will be deleted.
Note:
To disengage gate opener, move the gate to the middle position, then close the
clutch and press the open button of external button switch to open the gate.
If the gate opening direction is wrong, you can change the direction through the
toggle switch SW1 on the control board or exchange the motor phase-sequence
lines U and W. If the opening or closing limit is wrong, please exchange limit switch
lines CLLM and OPLM on the control board.
Figure 18
OPEN
CLOSE
STOP
