8
Automatic Mode Weekly Timer:
You can set a maximum of four heating programs per day. This means that you can
schedule up to four start times and end times per day. Programs can only be set in one-
hour increments.
1. Selecting the day to set:
Press (2) to select automatic mode and (15) will display
A
Then press (3) and the current day on the screen (9) will be flashing
Touch (5 or 6) to select the day you wish to program
Then Press (3) to confirm the day before proceeding to set the time.
Note: If setting the program for the first time 00 will display in (17-18) if the unit has
been previously programmed the first program will display.
2. Time setting:
The program indictor 1 will now be displayed in (19) indicating you are setting the first
program for the day selected and (17) will flash.
Touch (5 or 6) to set the desired starting time. Then touch (3) to confirm and (18) will
flash now Touch (5 or 6) to set the desired end time.
Touch (4) to confirm the first program and end programming OR touch (3) to confirm
and proceed to set the second program for the day.
If proceeding to set the second program for the selected day the program indicator 2
will display in (19) Repeat as above to set program 2-4.
Once finished touch (4) to confirm ad exit program setting.
Repeat 1 & 2 as needed for each day of the week.
Notes:
•
When in automatic mode (16) will not display.
•
Your Serene Heating Panel is fitted with a 24-hour clock.
•
If the start time and end time match the system will cancel the program
