7
Time & Date setting:
When setting up the program
for the first time
the actual time needs to be set up as
follows.
Day
: With the power on press (3 and 4) at the same time for 3 seconds.
The day (9) will flash.
Press (5 and 6) to select the day and press (3) to finish.
Hour:
The hour indicator (17) will be flashing,
Touch (5 or 6) to set the hour and press (3) to finish.
Minute:
The minute indicator (18) will be flashing.
Touch (5 or 6) to set the minute and touch (3) to finish.
The time symbols will now stop flashing & the time and day are set and will be
displayed.
24-Hour Manual Mode Timer:
This can be set to switch the unit off at a desired time with in 24-hour period.
Touch (2) to select Manual mode.
Touch (3) to set the timer and (17) will flash
Then touch (5 or 6) to adjust the hour.
Touch (3) again to set the minute and touch (4) to confirm.
The timer set indicator (16) will illuminate once the timer has been successfully set.
Note:
•
If the selected hour is prior to the current hour, the system automatically rolls
over to the following day.
•
If the selected hour is the same as the current hour but the selected minute is
less than the current minute, the system automatically rolls over to the following
day.
