4
Wall Mounting Instructions:
The heater is fixed on the wall with the mounting bracket attached to back of the
heater.
To secure mounting bracket to the wall
•
Remove the wall mounting bracket from the back of the heater, by compressing
the fittings at the top and/or sides of the bracket, which clip into the heater
body.
•
Place the mounting bracket against the wall, ensuring the bracket is level and the
minimum distance between the heater and the adjacent surfaces are adhered to
•
Mark and drill the fixing holes at the top and bottom of the mounting bracket,
and attached to the wall with suitable screws and/or wall anchors).
•
Locate the heater over the bottom clips of the wall bracket and then push the
heater securely into the fittings on the top and/or sides of the bracket.
To remove heater from the wall
•
Using a pointed tip screwdriver, push in and lever out the fittings at the top
and/or sides of wall mounting bracket.
•
Lift the heater up and away from the wall.
Important:
The minimum required distance from the heater to any floor is 150mm. The
minimum required distance from the heater to any adjacent wall is 200mm.
The heater must NOT be located immediately below a socket outlet or within reach
of a bath or shower.
