2
S2077
Serene Bathroom Fan Heater
Safety Information
When using any electrical appliance, safety precautions should always
be observed. Read these instructions carefully, and retain for future
reference. For service, contact your nearest authorised service agent.
•
When used by, or near, young children or infirm persons, close
supervision is necessary. Young children should be supervised to
ensure that they do not play with the appliance.
•
Do
NOT
use this appliance other than for its intended use.
•
Do
NOT
cover the grilles or place any object or material up against
the unit, as this may block entry or exhaust airflow.
•
Do
NOT
probe any opening to remove fluff.
•
Do
NOT
allow the supply cord to come into contact with heated
surfaces during operation.
•
Use this appliance with the voltage specified on the rating label.
•
Be very careful not to touch hot surfaces or moving parts.
•
If the supply cord becomes damaged, it must be replaced by a
SKOPE authorised service agent, or similarly qualified person, in
order to avoid a hazard.
•
Regulations require that electrical work be carried out by
authorised persons. For your own safety and that of others, ensure
this is done.
Operation
The operation of the heater is controlled by use of the pull-cord switch.
Pull the pull-cord to switch the heater on. Pull the pull-cord again to
switch the heater off. The red LED indicator lights when the heater is
operating.
The heat output is regulated by an internal step-down thermostat,
which will reduce the output from 2000-2400 Watts to 1000-1200
Watts, when a comfortable room temperature is reached.
