7
LTRS Series
Serene Heated Ladder Towel Rail - Square Profile
To install the Towel Rail with visible supply cord:
1. Firstly, establish a suitable position on the wall for attaching
the Towel Rail, with at least two leg Mounting Brackets
aligned with wall studs or dwangs.
2. Remove the Cable Mounting Bracket from the Towel Rail by
undoing the side Leg Fixing Screw.
3. Attach the Cable Mounting Bracket to the wall, ensuring the
slot is facing downwards. Fit the Flat Washer (supplied)
inside the Bracket (see Figure 3 on page 6) and attach to
the wall with either a Wall Fixing Screw (supplied) or a
suitable wall fixing plug.
4. Attach one of the Adhesive Dots (supplied) to the back of
each of the remaining three Mounting Brackets and remove
the protective paper backing.
5. Insert the remaining three Mounting Brackets into the frame
mounting legs. Ensure the rectangular fixing slot, in each
Mounting Bracket, faces downwards.
6. Fit the Towel Rail frame leg onto the Cable Mounting
Bracket, already screwed to the wall, ensuring the Supply
Cable Grommet engages firmly into the Mounting Bracket. If
necessary use a level to align the Towel Rail in the desired
position, before pressing firmly against the frame to adhere
the remaining three Mounting Brackets to the wall.
7. Pull the Towel Rail frame away, leaving the Mounting
Brackets attached to the wall.
8. Attach the remaining three Mounting Brackets to the wall
using the three Wall Fixing Screws (supplied).
9. Refit the Towel Rail frame over the Mounting Brackets and
lock in place with the four Leg Fixing Screws (supplied).
10. Either connect the supply cord to a socket outlet or, if
installed in a bathroom, have an authorised person connect
the supply cord to a switched permanent connection unit.
