Troubleshooting Aid
17
8
Troubleshooting Aid
Item Trouble
Fix
1
No LED’s lighted on
unit
Verify that the power outlet is working.
Should not be controlled by a light
switch.
2
Power LED OK
No flashing LED
Verify that you have the correct channel
on all units.
Verify that the RJ-11 cable is correctly
seated in the jack.
3
Power LED OK.
No flashing LED
Verify that the wall jack is wired
correctly. Use phone to verify dial tone.
4
LED is flashing,
limited bars on
computer
Adjust power setting to high level at one
or all XTN units
5
LED’s seem to
working but no
traffic
Verify WAP is working. Can the
computer access WEB with correct
SSID in same room as the WAP? If not
bad WAP.
6
LED’s are flashing,
computer sees
other SSID’s on
same channel.
Reset network for another channel.
Channels 1,6,11 are the only three non-
overlapping channels
7
LED on right
flashing, but no
traffic
Units are too close together
