- 8 -
3.4
、
STORAGE
存储
1
、
Do not remove the original packaging if the module requires long-distance transport or long-term storage.
如果组件需要长途运输或长期存储，请不要拆除包装。
2
、
Do not expose the modules to rain or moisture. Store the finished product in a well ventilated, waterproof,
dry and smooth place.
禁止淋雨或者受潮，请将包装的成品置于通风、防雨、干燥及平整的地方。
3
、
Do not stack modules more than 2 layers. (moisture
＜
85%RH, temperature range from -20°C to + 40 °C)
组件最多堆码
2
层（湿度＜
85%RH
；温度：
-20
℃～
+40
℃）
4
、
The module must be installed as soon as possible in the project site and must not be exposed to rain or
damp. Seraphim shall not be responsible for any damage or collapse of the modules caused by moisture in the
packaging.
到项目地组件应尽快安装，禁止暴露在雨水和潮湿环境中，如因为包装受潮导致组件破损、倒塌等问题，赛拉
弗不承担责任。
5
、
If pallets are stored temporarily outside then place a protective covering over the pallet to protect it from
direct weathering and do not stack more than one pallet high.
如果托盘暂时存放在外面，那么在托盘上放置一个保护性的覆盖物，以防止它直接风化，不要堆叠超过一个托
盘的高度。
3.5. Working Conditions
工作条件
Pmax Temperature Coefficient
-0.42 %/°C
Voc Temperature Coefficient
-0.32 %/°C
Isc Temperature Coefficient
+0.04 %/°C
Operating Temperature
-40~+85 °C
Measurement of nominal module operating temperature
（
NMOT
）
45±2 °C
Maximum System Voltage(IEC)
1000V/1500V
（
for
–HV
&-
TB&-BG&-DG
）
Grounding conductivity
<0.1Ω
PV module classification
Class II
Insulation Resistance
≥
100M
Ω
3.6. ELECTRICAL RATING
额定功率
SRP-XXX-6MA-HV/ SRP-XXX-6MA/ SRP-XXX-6MA-TB
（
XXX=330-400
）
Electrical Characteristics
