Sequential Prophet Rev 2 Скачать руководство пользователя страница 47

Страница: 47 / 58

Appendix D: Troubleshooting and Support

Sequential

Prophet Rev2 User’s Guide

Appendix D: Troubleshooting and Support

If the OS fails to load correctly when you update:

• The Prophet Rev2 is equipped with a MIDI bootloader, which will

allow you to reload the OS in the event you accidentally “brick” your

synth (permanently freeze it) while updating its OS.

To restore your Prophet Rev2 if it is frozen.

1. Power on the Prophet Rev2 while holding the

glide

switch to enter

bootloader mode. You’ll see a message in the display.

2. Use a MIDI cable (not USB) to transmit the new OS to your synth. You

must use a standard MIDI cable for this. USB MIDI doesn’t work in

bootloader mode.

3. As the OS loads, you will see the main display count upward from zero

to 99. When it reaches 99, a second count will begin. Do not power

down. The Prophet Rev2 will restart itself when it is done.

Contacting Technical Support

If you are still having a problem with the Prophet Rev2, contact

Technical Support at [email protected]. Please include your

Prophet Rev2’s serial number, the version of the operating system

(displayed when the Global button/menu is enabled), and the purchase

date.

If you have not already reset the Global parameters and run the calibration

routines (see Troubleshooting), you should do it before contacting Technical Support.

It’s probably the first thing they’ll ask you to do.

Warranty Repair

Sequential warrants that the Prophet Rev2 will be free from defects in

materials and/or workmanship for 1 year from the date of purchase.

Please register your product online at

www.sequential.com

to establish

the date of purchase. (This is not a requirement for warranty service, but

it will help expedite the process.)

Please contact [email protected] to determine the best course of

action for getting your Prophet Rev2 repaired. For your own protection,

as well as ours, please do not return any product to Sequential without

a return authorization (RA) number. To issue an RA number, Technical

Support needs:

• Your name

• Your return address

• Your email address

• A phone number where you can be reached

• Your Prophet Rev2’s serial number

• The date of purchase and where purchased

If you need to return your instrument for repair, you are responsible for

getting it to Sequential. We highly recommend insuring it and packing in

the original packaging. Damage resulting from shipping a product with

insufficient packaging is not covered by warranty.

Содержание Prophet Rev 2



























































Результаты поиска

Содержание Prophet Rev 2

Отзывы:

Похожие инструкции для Prophet Rev 2

Бренды по названию

Популярные бренды

Sequential Prophet Rev 2, Руководство пользователя

Результаты поиска

Содержание Prophet Rev 2

Отзывы:

Похожие инструкции для Prophet Rev 2

Бренды по названию

Популярные бренды