Sequential Prophet Rev 2 Скачать руководство пользователя страница 20

Страница: 20 / 58

Filter Envelope

Sequential

Prophet Rev2 User’s Guide

Amplifier Envelope

Delay:

0...127

—Sets a delay between the time the envelope is triggered

(note on) and when the attack portion actually begins.

Attack:

0...127

—Sets the attack time of the envelope. The higher the

setting, the slower the attack time and the longer it takes for the filter to

open from the level set with the filter

cutoff

knob to the level set by the

filter envelope amount. Percussive sounds typically have sharp (short)

attacks.

Decay:

0...127

—Sets the decay time of the envelope. After a sound

reaches the filter frequency set at its attack stage,

decay

controls how

quickly the filter then transitions to the cutoff frequency set with the

sustain

knob. The higher the setting, the longer the decay. Percussive

sounds, such as synth bass, typically have shorter decays (and a generous

amount of low-pass filter resonance).

Sustain:

0...127

—Sets the filter cutoff frequency for the sustained

portion of the sound. The sound will stay at this filter frequency for as

long as a note is held on the keyboard.

Release:

0...127

—Sets the release time of the envelope. This controls

how quickly the filter closes after a note is released.

Amplifier Envelope

After passing through the filters, a synthesized sound goes into an analog

voltage controlled amplifier or VCA, which controls its overall volume.

The VCA has a dedicated, five-stage envelope generator (DADSR).

The Amplifier Envelope is used to shape the volume characteristics of a

sound over time by giving you control over its attack, decay, sustain, and

release stages (plus a delay parameter to delay the onset of the envelope).

Along with the filter envelope, this is one of the most important factors in

designing a sound.

Without a volume envelope, the volume of a sound wouldn’t change

over the duration of a note. It would begin immediately, remain at its full

volume for the duration of the note, then end immediately when the note

was released. Again, that’s not very interesting sonically and it’s not typi-

cally how instruments behave in the real world.

To give you a real-world example, the main difference between the sound

of the wind and the sound of a snare drum is that they have very different

volume envelopes. Otherwise, they are essentially both white noise.

Wind has a relatively slow attack, a long sustain, and a long decay and

release. A snare drum has a sharp attack, no sustain, and very little decay

or release. But again, they are both fundamentally white noise.

AMPLIFIER

PAN SPREAD

ATTACK

ENV AMOUNT

DECAY

VELOCITY

SUSTAIN

DELAY

RELEASE

Amplifier Envelope

Содержание Prophet Rev 2



























































Результаты поиска

Содержание Prophet Rev 2

Отзывы:

Похожие инструкции для Prophet Rev 2

Бренды по названию

Популярные бренды

Sequential Prophet Rev 2, Руководство пользователя

Результаты поиска

Содержание Prophet Rev 2

Отзывы:

Похожие инструкции для Prophet Rev 2

Бренды по названию

Популярные бренды