_______________________________________________________________________ 1 AsteRx3_HDC
AsteRx3 Product Family Hardware Manual v2.5.0
8
1.1
Connectors
Connector
Type
PWR
ODU MINI-SNAP Series F, 5 pins, part number male connector: S42F1C-T05MPHO-90CP
Pinout of the female connector.
I/O I
I/O II
ODU MINI-SNAP Series F, 16 pins, part number male connector: S42F1C-T16MFDO-90CS
Pinout of the female connector.
ANTENNA
TNC
The functionalities marked yellow in the tables below are only available if the input/output board
inside your receiver is of type BIO0019x. If it is of type BIO0008x, the pins are reserved and must be
left unconnected. Please check your input/output board version in the hardware release note shipped
with your receiver (document “AsteRx3 Product Group Hardware Release Notes.pdf”, section
“Hardware Deliverables”).
PWR
Pin# Name
I/O type
Level
Comment
1
Ground
P
0V
2
Power1_In
P
9 – 30V
Main power input
3
Power2_In
P
9 – 30V
Backup power input. The receiver automatically
switches to Power2_In when the voltage at Power1_In
drops below 7V.
4
Reserved
To be tied to ground for proper operation.
5
Vantenna
P
0 – 12 V
If not connected, a 5-V DC supply is applied to the
central conductor of the TNC antenna connector. If
Vantenna > 4V, the applied voltage is transferred to the
antenna connector. Max current: 200mA.
Note: I/O type: I=input, O=output, P=power.
POWERLED
TRACKLED
LOGLED
PVTLED
4
5
1
2
3
1
2
7
8
9
10
11
12
13
14
15
16
3
4
5
5
6
