_______________________________________________________________________ 1 AsteRx3_HDC
AsteRx3 Product Family Hardware Manual v2.5.0
12
1.3
Stand-By Mode
The receiver can be put in stand-by mode by entering the command “
exePowerMode, standby
”
(see Command Line Interface Reference Guide).
After having requested to enter stand-by mode, it takes up to 0.5 seconds for the receiver to actually
enter low-power state. This time is required to unmount the SD memory card and stop all software
activities.
Putting the receiver in stand-by mode is mandatory before shutting down the power supply if internal
logging is active.
1.4
SD Memory Card Usage
The receiver incorporates a SD memory card for internal logging. Refer to the “How-to…” section of
the Firmware User Manual to learn how to use this feature.
Before unplugging the power connector or resetting the receiver, it is needed to put the receiver in
stand-by mode and to wait at least 0.5 seconds for the SD card to be cleanly unmounted (see also
section 1.3). Failing to do so can lead to file corruption.
1.5
Applicable Software Package
The AsteRx3_HDC is compatible with Septentrio’s SSRC3 Software Packages.
1.6
Hardware Specifications
1.6.1
Power Consumption
Nominal operation:
4.3W
Stand-by mode :
0.55 W
1.6.2
Environmental
Temperature Range:
-40 to +60 °C (operational)
-55 to +85 °C (storage)
Protection Class:
IP65
