SEPTENTRIO AsteRx SB3, Руководство пользователя

Страница: 28 / 45

CHAPTER 3. CONF I GUR I NG THE ASTERX SB3
Verifying the configuration
Having con fi gured the settings and clicked Ok to apply them, you can now connect to the
con fi gured Ethernet port of the AsteRx SB3 using a terminal emulator tool such as Data Link
2
.
The Ethernet I P address is I P address shown under Ethernet Status on Communication >
Ethernet page.
This I P address and the port number 600 can then be used to con fi gure a Data Link
connection as shown in Figure 3-26.
Figure 3-26: Con fi gure the Data Link terminal emulator tool to connect to the
AsteRx SB3 Ethernet port over which di ff erential corrections have been con fi gured
When connected to the output correction stream, click on the Show Data button on Data
Link and you should see output similar to that shown in Figure 3-27.
2
Data Link is part of Septentrio ’ s RxTools suite of GU I Tools supplied with the AsteRx SB3
28