F1-110 MANUAL VER 1.0.3
12
To display images from F1-110, connect the video output port to monitor or TV with appropriate
video cable. Any TV with a video input terminal is suitable for displaying the images. The diagram
above shows the video signal connections.
Connect the camera to video-in terminal of AV-IN connector; connect the monitor to video-out
terminal of AV-OUT connector.
Note: RCA cable required for this connection is not provided with F1-110
②
Audio Input/Output Connection (For TV / monitor speaker)
Connect a microphone to audio-in terminal of AV-IN connector and connect the speaker to audio-
out terminal of AV-OUT connector.
③
GPS Connection
GPS antenna (F1-110G model) should be connected additionally when you want to use GPS
function. Antenna must be placed toward the direction of the sky so that it receives GPS signal
well from GPS satellites. F1-110 cannot receive GPS signal well it is placed in the confined
spaces such as ‘among tall buildings’ and ‘in tunnels’. It may take long time for F1-110 to receive
GPS signal when it is left in ‘power-off’ condition for long term. When it does not find GPS signal,
check if the current position is shaded area and reset GPS by pressing GPS button on remote
control.
Note: GPS signal reception failure may occur under the following conditions.
1) An object is placed on the antenna.
2) Windshield is tinted in metal constituent.
3) Install electric device that generates electromagnetic interfering GPS signal inside of
vehicle. ex) Remote Start System
4) Cloudy weather
5) Confined spaces; in tunnel, under overpass, in underpass, in underground parking lot,
among tall buildings and etc.
※
Electrical device near GPS antenna can interfere GPS data reception. Be sure to place GPS
antenna to the appropriate position.
