F1-110 MANUAL VER 1.0.3
11
CHAPTER 5: HARDWARE INSTALLATION
SD memory INSTALLATION
1. Format SD memory card
Insert SD memory card into SD slot in your PC and format it
※
Be sure to format SD memory card in FAT32 or FAT16.
32KB is highly recommended as the default allocation size.
※
If your PC does not have SD slot, use SD memory card reader.
※
Timely formatting the SD memory card and backup the files in it are required to avoid SD
memory card error and file loss.
※
Use the original SD memory card only. If not, data loss may happen.
It is recommended to use original SanDisk SD memory card.
2. Insert SD memory card into the SD slot in F1-110
After formatting, take out SD memory card from your PC and insert it into SD slot on F1-110.
When taking out SD memory card from F1-110 slot, you should press eject button for 1~2
seconds on the remote control.
※
Pressing eject button shut the power to SD slot. This status lasts for 3 minutes and is
deactivated automatically after 3 minutes. This is deactivated before 3 minutes on the following
status; Mode change (Live
Playback) / Emergency Recording / Removing SD memory card)
3. Backup recorded files in SD memory card
When SD Memory card capacity is full, the recorded files can be backed up in your PC. Insert
SD memory card in your PC and move the files in the HDD of your PC. You can also check each
recorded file through viewer software.
4. Connecting F1-110 to TV or monitor
①
Video Input/Output
