SEON Trooper TL2, Руководство по установке

Страница: 23 / 84

DVR Setup
700-0099 R008 2–7
10. In the Recording Settings menu, click Camera. Set the recording parameters for
each camera here.
11. In the Recording Settings menu, click Timers only if you have a specific
requirement for timers.
New titles will display here as well
as in the play view overlays.
Speed
: Leave the channel speed at
default settings unless you have
special requirements. Set any unused
cameras’ speed to Off, so the DVR
will not generate video loss events.
Resolution
: Leave the channel
resolution at default settings unless
you have special requirements.
Quality
: Leave the channel quality at default settings unless you have special
requirements.
Audio
: Leave audio settings On unless the camera is mounted on the exterior of
the vehicle or if you have special requirements.
Click
Back
to save the menu settings.
Figure 2-10 Camera Settings Menu
CAUTION: Set Unused Cameras Off
When a DVR is installed with less than the full complement of cameras
connected, disable unused camera input settings to prevent the DVR from
generating Video Loss (VLoss) events for those camera inputs. In the DVR
Configuration menus, disable unused camera inputs as follows:
• Record Settings menu: Camera Speed OFF,
Camera Audio OFF (to save disk space)
• Alarms/Signals menu: Channel Speed OFF.
Leave the
Enable Timers
setting
set to Off, unless instructed
otherwise and provided specific
start and end timer information.
The timer function can only operate
when the ignition is on. It cannot be
set to record when the vehicle is off.
Click
Back
to save the menu
settings.
Figure 2-11 Timer Settings Menu