senva TotalSense Series, Руководство по навигации, Страница: 3 / 19

Display Navigation Guide, TotalSense Series Page 3 of 19 154-0042-0B
Display Navigation
Congratulations on installing your new Senva TotalSense Air Quality Sensor! This OLED Parameter Map assumes
the first stage of installation is complete, with the TotalSense connected and powered. The OLED display should
show the home screen when any button is pressed. If you see a lock icon, hold the up and down arrows for 5
seconds to unlock.
Figure 1: Default Home Display Figure 2: Sample Display
If you see a lock icon, hold the up and down arrows for 5 seconds to unlock.
To change any setting, press enter to see setup menu and navigate to desired parameter and press enter again
to choose. For example, to adjust display parameters, access the setup menu by pressing the ‘enter’ button once
to access the setup and once more to access the “display” menu and then select “center display”.
Select your value for center display and then select “go back” until you are back at the home screen.