SentrySafe SFW123ES, Руководство пользователя

Страница: 14 / 48

13
English
Troubleshooting
The Problem: Why it is Happening: The Solution:
The door will not lock Shipping screw is in place Remove the screw on the
back inside of the door
The handle is not in the
horizontal position when
the safe is locked The clutch mechanism has
been engaged Rotate the handle up or
down until it clicks into the
horizontal position
Cannot open door after
inputting the electronic
code Safes doors equipped with
a water resistant gasket
may initially be tight Hold the handle up while
inputting the code and
then pull down when the
green light comes on
Red indicator light blinks
three times and there
are three beeps An incorrect code has been
entered Verify code and re-enter
Red indicator light blinks
five times and there are
five beeps Please call our Customer
Service center
1-800-828-1438
Red indicator light blinks
once and there is one
beep Program button is pressed
out of sequence.
-or-
5 seconds has lapsed
between button entries Start over
Red indicator light is
blinking An incorrect code has been
entered three times Wait two minutes and start
over
Yellow indicator light
is on Battery power is low. The
handle will not open with
this light on Replace batteries
The dial does not turn Ensure the handle is in the
horizontal position
The handle does not
rotate Ensure the keylock is in the
unlocked position