SentrySafe Master Lock Fire-Safe FP082C, Руководство пользователя

Страница: 11 / 48

11
English
Bolting Down Your Safe
Bolt-down instructions
Bolt-down kit contents (in select models only):
• 2 lag screws
• 2 gasket washers
• 2 masonry anchors
Tools needed to bolt safe to the floor:
• Drill
• Wrench
•
7
⁄
16
” (11 mm) drill bit – for drilling into the safe
•
9
⁄
32
” (7.2 mm) drill bit – for drilling into a wood floor
•
3
⁄
8
” (9.5 mm) drill bit – for drilling into a masonry floor
Warning: • DO NOT drill from any location inside the safe.
• DO NOT bolt through the walls.
1
Tip the safe onto its right side (door hinges horizontal with
the floor).
2
Unlock the safe and open the door. Turn the safe on its side so
the bottom of the safe is accessible. Using the 7/16” (11mm)
bit; drill a hole through two perpendicular feet on the bottom of
the safe.
DO NOT drill from any location inside the safe.
3
Tip the safe upright, place the safe in the desired location
and open the door.
4
Use a screw or pencil to mark the floor through both holes.
F
F