M2MNV
P. / 4
EM-5095 Rev.
INSTALLATION
Loosen the fixing screw at the front of the unit in order to separate the body from the base socket.
■
DIN RAIL MOUNTING
Set the base socket so that its DIN rail adaptor is at the bottom. Position the upper hook at the rear side of base socket on
the DIN rail and push in the lower. When removing the socket, push down the DIN rail adaptor utilizing a minus screwdriver
and pull.
■
WALL MOUNTING
Refer to “EXTERNAL DIMENSIONS.”
DIN Rail
35mm wide
Spring Loaded
DIN Rail Adaptor
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
www.sentronic.com
Produkte, Support und Service
SENTRONIC
AG
