38
Operating instructions for the user - Figure
8
8
While the sauna is in operation
Programmed values can be checked and modified
while the sauna is in operation.
Checking desired values
1. Use the UP / DOWN buttons
7
to scroll to the
desired menu item, e.g. TEMP.
The current temperature will be displayed.
2. Press OK
6
.
The programmed target temperature value will be
displayed.
The current temperature will be displayed after 20
seconds.
How to change desired values
1. Use the UP / DOWN buttons
7
to scroll to the
desired menu item, e.g. DURATION.
The remaining heating duration will be displayed.
2. Press OK
6
.
The display
5
indicates:
SAUNA
SET
Duration
previously selected
heating duration,
e.g. 02:30
3. Use the UP / DOWN buttons
7
to enter the new
value, e.g. [01:30].
4. Press OK
6
.
The new heating duration is accepted and the
remaining heating duration will be displayed.
Ending automatic operation early
1. The START / STOP button
8
turns OFF the au-
tomatic sauna operation.
The signal lamps (
8
/
A
) turn off.
9
When the heating time has lapsed
When the heating time has lapsed, a signal will sound
and the display
5
indicates the following:
SAUNA
OFF
Duration
STOP
The programmed values will be saved in the control
until they are changed.
Turning off the control
1. Press ON / OFF button
3
.
The display
5
indicates:
- - - -
2. Turn off the ON / OFF switch
1
. The control unit
will be disconnected from the mains.
The sauna control is turned off.
NOTE:
After automatic operation has lapsed, it will have to
be activated again for a new sauna bath.
