35
Operating instructions for the user - Figure
8
5
Manual operation quick-start
After setting the time according to chapter 3, the control
is ready-to-operate.
1
Turning on the control
1. Turn on ON / OFF switch
1
.
If the display
5
indicates:
- - - -
Press ON / OFF button
3
.
The display
5
indicates the
last condition displayed, e.g.:
SAUNA
OFF
Parameter
value
2
Selecting sauna operation (with CV F4 only)
Press sauna button
A
.
3
Entering the heating duration
Note - Heating duration
The heating duration of the sauna control can be set up
to a max. of 6 hours.
1. Use the UP / DOWN buttons
7
to scroll to
DURATION.
2. Press OK
6
.
The display
5
indicates, e.g.:
SAUNA
SET
Duration
06:00
or the value set previously.
3. Use the UP / DOWN buttons
7
to enter the desi-
red value, e.g. [02:30].
4. Press OK
6
.
The display
5
indicates:
SAUNA
SEND
Duration
02:30
After approx. 1 second you will see:
SAUNA
OFF
Duration
STOP
The heating duration has been set.
5
Continued
5. Press START / STOP button
8
.
The heater starts to heat instantly at the previously
entered values.
The display
5
indicates:
SAUNA
ON
Duration
02:30
Both signal lamps are illuminated (at button
8
and
A
).
6. To exit:
6.1 Manually:
Press START / STOP button
8
.
The sauna heater turns off.
The signal lamps (
8
/
A
) turn off.
6.2 Automatically:
After the set parameter for heating duration has
lapsed, the sauna will automatically stop opera-
tion.
4
How to turn off the control
1. Press ON / OFF button
3
.
The display
5
indicates:
- - - -
The sauna control is turned off.
2. Turn off ON / OFF switch
1
. The control unit is
disconnected from the mains.
NOTE - Interior lighting
If you have used the ON / OFF switch
1
to turn off the
interior lighting, you'll be able to operate it only via light
switch
2
.
