36
Operating instructions for the user - Figure
8
6
Programming automatic operation
NOTE - “High-speed run”:
Pressing and holding the UP / DOWN buttons
7
trig-
gers a “high-speed run” after 5 seconds.
NOTE - “Timeout”:
After 20 seconds without entering a command, the pre-
vious display will appear.
WARNING - Fire hazard:
Prior to turning on the sauna control and
when setting the automatic operation (sys-
tem turns on automatically after a fixed time)
make sure that no combustible objects have
been placed on top of the stove.
1
Turning on the control
1. Turn on ON / OFF switch
1
, if it was off.
2. If the display
5
indicates:
- - - -
Press ON / OFF button
3
.
The display
5
indicates the
last condition displayed, e.g.:
SAUNA
OFF
Parameter
value
2
Selecting sauna operation (with CV F4 only)
Press sauna button
A
.
6
Continued
3
Select start of heating [0 - 24 hrs.]
1. Use the UP / DOWN buttons
7
to scroll to START
TIME.
2. Press OK
6
.
The display
5
indicates, e.g.:
SAUNA
SET
Start Time
00:00
or the value set previously.
3. Use the UP / DOWN buttons
7
to enter the desi-
red value, e.g. [18:30].
4. Press OK
6
.
The display
5
indicates:
SAUNA
SEND
Start Time
18:30
After approx. 1 second you will see:
SAUNA
OFF
Start Time
18:30
The start time for heating has been set.
4
Selecting the heating duration [max. 6
hours]
1. Use the UP / DOWN buttons
7
to scroll to DU-
RATION.
2. Press OK
6
.
The display
5
indicates, e.g.:
SAUNA
SET
Duration
06:00
or the value set previously.
3. Use the UP / DOWN buttons
7
to enter the desi-
red value, e.g. [02:30].
4. Press OK
6
.
The display
5
indicates:
SAUNA
SEND
Duration
02:30
After approx. 1 second you will see:
SAUNA
OFF
Duration
STOP
The heating duration has been set.
