© Copyright Sentient ®. All documentation rights reserved.
49
To allow access to the ISP (Internet Service Provider) provide the PPPoE
username and password then restart the system after saving. After
restarting, the DVR will automatically establish a network connection to the
PPPoE mode, when successful, the IP [IP address] will automatically modify
the dynamic WAN IP address obtained.
NTP:
Figure 3.19 NTP settings
You need to install the NTP service on a PC before setting up the details in
this menu.
[Enable]:
When the box is ticked the NTP is enabled.
[Server IP]:
Enter installed NTP server PC
’s IP;
[Port]:
The default NTP port 123, the port settings can be based on actual
NTP server;
[Update Period]:
the same NTP server check interval, the default is 10
minutes.
