2. Press
from the residence phone.
3. Press
1. Press
from the residence phone.
The unit is now prepared to accept a direct command.
0
9
WXYZ
PAGE 26
Speak Through the Crown Jewel Speaker - 90
Sets the Crown Jewel Keypad so it will stop accepting codes after 3 unsuccessful attempts.
1. Press
2. Enter Alarm Call Number (up to 12 digits) or enter "00" to contact the residents telephone.
3. Press
EXAMPLES:
1
2
3
Set Alarm Call Number - 22
Sets the Crown Jewel unit to make an alarm call when the door is forced open or the keypad has "Struck-Out".
1. Press
2. Enter Alarm Code Mode (0-3)
0 = Disables Alarm Call
1 = Unit will make an alarm call when the door is forced open
2 = Unit will make an alarm call when a keypad has "Stuck-Out"
3 = Unit will make and alarm call when the door is forced open or when the keypad has "Struck-Out"
3. Press
EXAMPLES:
1
2
3
Enable/Disable Alarm Call- 21
1. Press
from the residence phone ONLY.
4. Press
. Then hang up the telephone.
2. Enter Ring Digit (1-4)
1 = Single Ring
2 = Double Ring
3 = Triple Ring
4 = Quadruple Ring
Using the In-House Paging Feature - ##0
Any telephone connected to the Crown Jewel
will ring twice until the telephone receiver is
picked up.
EXAMPLE:
1
2
3
This direct command will cause any telephone connected to the Crown Jewel’s phone line to give a distinctive ring.
This direct command allows the user to speak though the Crown Jewel speaker to greet visitors, ward off vandals, etc.
Program the phone number to call in case of an alarm condition. When you pick up the phone, you will hear continuous
hi-low tones indicating an alarm condition.
FACTORY SETTING:
Disabled
This terminates automatically in 60 seconds unless you hang up the line sooner.
You can extend the talk time by pressing "1" on your phone.
