Sentera Controls RMFPX-2R, Монтаж и эксплуатация

Страница: 6 / 11

www.sentera.eu
MIW-RMFPX-2R-EN-000 - 23 / 04 / 2018 6 - 11
back to the table of contents
MOUNTING & OPERATING INSTRUCTIONS IN STEPS
Before you start mounting the RMFPX-2R, read carefully “Safety and Precautions” .
Choose a smooth surface for installation (a wall, panel and etc.).
Follow these steps:
1. Using a flat screwdriver, remove the front white cover by releasing the snap-fits
on its both sides (see
Fig. 1
Snap-fits release ).
2. Insert the cables through the opening on the rear plate (See Fig. 2 Mounting
dimensions .)
3. Using suitable fastening materials (not supplied), position the room sensor at
least 1,5 m from the floor. When planning the installation, allow enough clearance
for maintenance and service. Mount the sensor in a well-ventilated area. Mind
the correct mounting position and unit dimensions. See
Fig. 2 and Fig. 3 .
Fig. 1 Snap-fits release Fig. 2 Mounting dimension
2x Ø
6
59,8
9,
8
74,5
104,5
20
104,5
25,
6
70,
5
Fig. 3 Mounting position
Correct
Incorrect
Position at min. 1,5 m
from the floor
RMFPX-2R
MULTIFUNCTIONAL
ROOM CONTROLLER