Sentera Controls RDCV, Монтаж и эксплуатация

Страница: 12 / 17

www.sentera.eu
MIW-RDCV-EN-002 - 27 / 04 / 2017 12 - 17
back to the table of contents
Table 3 Manual mode - additional parameters
Parameter Minimum Maximum Default value Menu
Start output value (%) 0 100 20 Start output
Number of output steps
(7)
0 9 0 Steps
Start output step (8) 0 9 0 Start step
Network settings
Net settings
ID
(9)
2 247 2 ID
(7)
When the number of output steps is set to:
0: There are no steps, the output is stepless from LO to HI
1: There are 2 steps (0 and 1) that correspond to the LO and HI settings
2: There are 3 steps (0, 1 and 2) that correspond to LO, halfway LO and HI, and HI
(8)
Only relevant when the number of steps > 0
(9)
In manual mode the Network ID can be adjusted. In automatic mode, the ID is always 2; the ID of the
connected sensor should be 1.
Table 4 Normal - Inverse function
Temperature sensor Heat Cool
Humidity sensor
Humidify Dry
Air quality / CO
2
sensor Obtain Drain
RDCV
RESIDENTIAL HVAC
CONTROLLER