background image

 

 

STC – TC83USB-ASH 
STC – TB83USB-ASH 

 

 

!

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO   REDUCE  TH E  RISK  OF  EL ECTRIC  SHOCK,   DO  N OT
REMOVE  COVER  (OR  BACK).    NO  USER  SERVICEABLE
PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The  li ghtning  flash  with  arrowhea d
symbol,  within  an  equilateral triangle,
i s  i nt ended  t o  al ert  the  use r  t o  the
pre sence  of  uni nsulated  “dangerous
v o l t a g e ”   w i t h i n   t h e   p r o du c t ’ s
enclosure  t hat   may  be   of  suffici ent
ma gnit ude  t o  c onst i tut e  a  ri sk  of
electric shock to persons.

The   excl ama ti on  poi nt   wi t hi n  a n
equilateral  triangle  is  intended to alert
the  user  to  the  presence  of  import ant
operating  and  maintenance (servicing)
i n st r u c t i o ns   i n   t h e   l i t e r a t u r e
accompanying the appliance.

!

Warning:

This equipment generates and uses radio frequency energy and if
not installed and used properly, I.e., in strict accordance with the
instruction manual, may cause harmful interference to radio
communications.  It has been tested and found to comply with the
limits for a Class A computing device pursuant to Subpart J of Part
15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment.

For U.S.A.

Warning:

This digital apparatus does not exceed the Class A limits for radio
noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of
Communications.

For Canada

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.

!

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO   REDUCE  TH E  RISK  OF  EL ECTRIC  SHOCK,   DO  N OT
REMOVE  COVER  (OR  BACK).    NO  USER  SERVICEABLE
PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The  li ghtning  flash  with  arrowhea d
symbol,  within  an  equilateral triangle,
i s  i nt ended  t o  al ert  the  use r  t o  the
pre sence  of  uni nsulated  “dangerous
v o l t a g e ”   w i t h i n   t h e   p r o du c t ’ s
enclosure  t hat   may  be   of  suffici ent
ma gnit ude  t o  c onst i tut e  a  ri sk  of
electric shock to persons.

The   excl ama ti on  poi nt   wi t hi n  a n
equilateral  triangle  is  intended to alert
the  user  to  the  presence  of  import ant
operating  and  maintenance (servicing)
i n st r u c t i o ns   i n   t h e   l i t e r a t u r e
accompanying the appliance.

!

Warning:

This equipment generates and uses radio frequency energy and if
not installed and used properly, I.e., in strict accordance with the
instruction manual, may cause harmful interference to radio
communications.  It has been tested and found to comply with the
limits for a Class A computing device pursuant to Subpart J of Part
15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment.

For U.S.A.

Warning:

This digital apparatus does not exceed the Class A limits for radio
noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of
Communications.

For Canada

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.

!

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO   REDUCE  TH E  RISK  OF  EL ECTRIC  SHOCK,   DO  N OT
REMOVE  COVER  (OR  BACK).    NO  USER  SERVICEABLE
PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The  li ghtning  flash  with  arrowhea d
symbol,  within  an  equilateral triangle,
i s  i nt ended  t o  al ert  the  use r  t o  the
pre sence  of  uni nsulated  “dangerous
v o l t a g e ”   w i t h i n   t h e   p r o du c t ’ s
enclosure  t hat   may  be   of  suffici ent
ma gnit ude  t o  c onst i tut e  a  ri sk  of
electric shock to persons.

The   excl ama ti on  poi nt   wi t hi n  a n
equilateral  triangle  is  intended to alert
the  user  to  the  presence  of  import ant
operating  and  maintenance (servicing)
i n st r u c t i o ns   i n   t h e   l i t e r a t u r e
accompanying the appliance.

!

Warning:

This equipment generates and uses radio frequency energy and if
not installed and used properly, I.e., in strict accordance with the
instruction manual, may cause harmful interference to radio
communications.  It has been tested and found to comply with the
limits for a Class A computing device pursuant to Subpart J of Part
15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment.

For U.S.A.

Warning:

This digital apparatus does not exceed the Class A limits for radio
noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of
Communications.

For Canada

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.

 

 

Safety Precautions 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Product Precautions 

 

  Handle the camera with care. Do not abuse the camera. Avoid striking or shaking it. Improper handling 

or storage could damage the camera. 

  Do not pull or damage the camera cable. 

  During camera use, do not wrap he unit in any material. This will cause the internal temperature of the 

unit to increase. 

  Do not expose the camera to moisture, or do not try to operate it in wet areas. 

  Do not operate the camera beyond its temperature, humidity and power source ratings. 

  While the camera is not being used, keep the lens or lens cap on the camera to prevent dust or 

contamination from getting in the CCD or filter area and scratching or damaging this area. 

  Do not keep the camera under the following conditions: 

  In wet, moist, and high humidity areas 

  Under hot direct sunlight 

  In high temperature areas 

  Near an object that releases a strong magnetic or electric field 

  Areas with strong vibrations   

  Use a soft cloth to clean the camera. Use pressured air spray to clean the surface of the glass. DO not 

scratch the surface of the glass. 

Product Specifications   

 

 

              2 of 11   

 

 

 

 

         Rev 1.1  

Содержание STC-TB83USB-ASH














Отзывы: