SenTech STC-MBS322U3V Скачать руководство пользователя страница 59

Страница: 59 / 65

No.15S103-01

59/65

STC-MBS510U3V / STC-MCS510U3V / STC-MBS322U3V / STC-MCS322U3V

Specifications and Use

’s guide

DeviceRegistersStreamingEnd

Announce the end of registers streaming. This will do a register set validation for consistency

and activate it.

DeviceTemperatureSelector

Selects the location within the device, where the temperature will be measured.

DeviceTemperature

Device temperature in degrees Celsius (C). It is measured at the location selected by

DeviceTemperatureSelector.

TimestampLatch

Latches the current timestamp counter into TimestampLatchValue.

TimestampLatchValue

Returns the latched value of the timestamp counter.

Name

Description

SensorWidth

Effective width of the sensor in pixels.

SensorHeight

Effective height of the sensor in pixels.

SensorShutterMode

Sets the shutter mode of the device.

WidthMax

Maximum width of the image (in pixels). The dimension is calculated after horizontal binning,

decimation or any other function changing the horizontal dimension of the image.

HeightMax

Maximum height of the image (in pixels). This dimension is calculated after vertical binning,

decimation or any other function changing the vertical dimension of the image

BinningSelector

Selects which binning engine is controlled by the BinningHorizontal and BinningVertical

features.

BinningHorizontalMode

Sets the mode to use to combine horizontal photo-sensitive cells together when

BinningHorizontal is used.

BinningHorizontal

Number of horizontal photo-sensitive cells to combine together. This increases the intensity (or

signal to noise ratio) of the pixels and reduces the horizontal resolution (width) of the image.

BinningVerticalMode

Sets the mode used to combine vertical photo-sensitive cells together when BinningVertical is

used.

BinningVertical

Number of vertical photo-sensitive cells to combine together. This increases the intensity (or

signal to noise ratio) of the pixels and reduces the vertical resolution (height) of the image.

DecimationHorizontal

Horizontal sub-sampling of the image. This reduces the horizontal resolution (width) of the

image by the specified horizontal decimation factor.

DecimationVertical

Vertical sub-sampling of the image. This reduces the vertical resolution (height) of the image by

the specified vertical decimation factor.

RegionSelector

Selects the Region of interest to control. The RegionSelector feature allows devices that are

able to extract multiple regions out of an image, to configure the features of those individual

regions independently.

RegionMode

Controls if the selected Region of interest is active and streaming.

ImageComponentSelector

Selects a component to activate data streaming from.

ImageComponentEnable

Controls if the selected component streaming is active.

Width

Width of the image provided by the device (in pixels).

Height

Height of the image provided by the device (in pixels).

OffsetX

Horizontal offset from the origin to the region of interest (in pixels).

OffsetY

Vertical offset from the origin to the region of interest (in pixels).

PixelFormat

Format of the pixels provided by the device. It represents all the information provided by

PixelCoding, PixelSize, PixelColorFilter combined in a single feature.

PixelFormatInfoSelector

Select the pixel format for which the information will be returned.

PixelFormatInfoID

Returns the value used by the streaming channels to identify the selected pixel format.

PixelSize

Total size in bits of a pixel of the image.

PixelColorFilter

Type of color filter that is applied to the image.

ReverseX

This feature is used to flip horizontally the image sent by the device. The AOI is applied after

the flipping.

ReverseY

This feature is used to flip vertically the image sent by the device. The AOI is applied after the

flipping.

Содержание STC-MBS322U3V


































































Результаты поиска

Содержание STC-MBS322U3V

Отзывы:

Похожие инструкции для STC-MBS322U3V

Бренды по названию

Популярные бренды

SenTech STC-MBS322U3V, Технические характеристики

Результаты поиска

Содержание STC-MBS322U3V

Отзывы:

Похожие инструкции для STC-MBS322U3V

Бренды по названию

Популярные бренды