!
INSTALLATION INSTRUCTION
1. Inspection before equipment installation
Equipment list:
1 sensor equipment
Certificate and warranty card
One white bracket, two M4 * 10 screws and nuts, and three M5 nuts
2. Installation method
Beam installation (optional)
The installation of the device without electronic compass is shown in the figure below. The device with built-in
electronic compass only needs to be installed horizontally.
Supply voltage
10-30V DC (0-10V output is powered by 24 V)
Power consumption
485
：
0.12W
4~20mA/0~5V/0~10V
：
1.2W
Range
Wind speed
0 ~ 40m / S (customizable),0.5m starting wind speed
Wind direction
0~360°
Accuracy
Wind speed
±0.5+2%FS
Wind direction
±3°
Resolution
Wind speed
0.01 m/s
Wind direction
1°
Working environment
-40
～
80
℃
，
0
～
95%RH
Wind resistance
75 m/s
Response time
1S
IP grade
485 type: IP65, analog type: IP54
Signal output
485 (Modbus RTU protocol)
4 ~ 20mA current output
0 ~ 10V, 0 ~ 5V voltage output
Load ability
Current output
≤
600
Ω
Voltage output
Output resistance
≤
250
Ω
TECHNICAL SPECIFICATION