SENSY COND-SGA-A, Руководство пользователя

Страница: 6 / 20

COND SGA-A & SGA-D Manuel_EN Rev3.doc Page 6 on 20 Rev: 03/08/2006
3. SWITCH SETTINGS
Switch Positions
e.g. The switches in Figure 3.1 are depicted as ALL ON.
3.1. Output Settings - Switch 4
Use switch 4 to select the required
output and, if required, the low pass
filter and 5V Excitation. (See Tables 3.1
and 3.2)
Figure 3.1.
3.1.1. Output Option
Output Option
Input Range
4-20mA 0 - 20mA 4-20mA 0 - 20mA 0 - 10V 0 - 5V ±10V ±5V
+ Full Scale 20mA 20mA 20mA 20mA 10V 5V 10V 5V
↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑
0 4mA 0mA 12mA 10mA 5V 2.5V 0V 0V
↓ ↓ ↓ ↓ ↓ ↓ ↓
- Full Scale n/a n/a 4mA Note 1 0mA Note 1 0V 0V -10V -5V
Table 3.1.
N.B. Full scale output on the voltage ranges is achieved with a bi-polar (±) input
Note 1 Negative inputs can be accommodated on the current output ranges by setting the ‘Zero’ switch SW2
to +50% (Table 3.8) and setting SW1 to twice the required mV/V setting (Table 3.6).
3.1.2. Switch 4
Analogue Output and Excitation Voltage Options - SW4
SW4 1 2 3 4 5 6 7 8
±10V 0 ↓ 0 ↓ 0 ↓ X X 1 ↑ =Filter in 1 ↑ Filter out 1 ↑ =10V Exc 0 ↓ =5V Exc
±5V 0 ↓ 1 ↑ 0 ↓ X X 1 ↑ =Filter in 1 ↑ Filter out 1 ↑ =10V Exc 0 ↓ =5V Exc
0-10V 0 ↓ 1 ↑ 1 ↑ X X 1 ↑ =Filter in 1 ↑ Filter out 1 ↑ =10V Exc 0 ↓ =5V Exc
0-5V 1 ↑ 1 ↑ 1 ↑ X X 1 ↑ =Filter in 1 ↑ Filter out 1 ↑ =10V Exc 0 ↓ =5V Exc
0-20mA X X X 0 ↓ 0 ↓ 1 ↑ =Filter in 1 ↑ Filter out 1 ↑ =10V Exc 0 ↓ =5V Exc
4-20mA X X X 1 ↑ 1 ↑ 1 ↑ =Filter in 1 ↑ Filter out 1 ↑ =10V Exc 0 ↓ =5V Exc