Hardware setup
4 - 10 • • • Senstar 100 Installation guide
Switching the active VGA port
1. Press F5.
The video output switches ports, and displays on the second monitor.
You can use the Exit Select Hardware function to exit the Select
Hardware menu and return to the Senstar 100 Startup Program
menu (press F12).
F1
Select Graphics Card and Number of Monitors
F2
Select and Align Touch Screen
F3
Select Keyboard Type
F4
Set Active Boot Partition
F5
Switch Active VGA Port on WARP Card
F12
Exit Select Hardware
Select Hardware
Press a function key to make a selection
>
VGA MASK 4.03
Version 6.12