Sensors & Software pulseEKKO Pro Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 78

background image

pulseEKKO PRO

3-System Setup Parameters

41

3.2.8 Pulser Setting

This setting allows the user to specify which transmitter (or pulser) is being used for data collection.
Several different transmitters can be used with a pulseEKKO PRO system.

In general, if you have a pulseEKKO PRO transmitter, set Pulser Setting to

PRO Auto

. This will

automatically set the transmitter to the highest voltage available for that transmitter. For example, a 400
Volt transmitter will be set to 400 Volts and a 1000 Volt transmitter will be set to 1000 Volts.

The only time that PRO Auto is not the correct setting for a pulseEKKO PRO transmitter is if you have a
400 to 1000 variable voltage transmitter and you want to set the pulser voltage to a value lower than 1000
Volts. As mentioned above, using the PRO Auto setting for this transmitter will result in the voltage being
set to the highest value, in this case 1000 volts. To set the transmitter to a different value, say 500 volts, it
is necessary to edit the Pulser Setting until PRO 500V is displayed.

Note that if you have a 400 volt or 1000 volt transmitter and you try to set it to a voltage other than the
correct one, an error will occur when you try to collect data.

The 1000 volt pulser is recommended when using 12.5 to 100 MHz antennas, while the 400 volt pulser is
recommended for 50 to 200 MHz antennas. Both pulsers can, however, be used for all antennas.

The pulseEKKO PRO can also be run using pulseEKKO 100 transmitters. The three options are PE100
400 for the 400 volt transmitter, PE100 1K for the 1000 volt transmitter and PE100 5K for the 5000 volt
transmitter.

«
...
49
50
51
52
53
...
»

Содержание pulseEKKO Pro















































































Отзывы:

Нет отзывов

Похожие инструкции для pulseEKKO Pro

Бренд: Icom Страницы: 63

Бренд: Icom Страницы: 7

Бренд: Icom Страницы: 53

Бренд: Icom Страницы: 2

IC-F3160 SERIES

Бренд: Icom Страницы: 14

Бренд: Icom Страницы: 2

Бренд: Cobra Страницы: 11

Бренд: Ubiquiti Страницы: 28

Бренд: HYT Страницы: 32

Бренд: TEXAS RANGER Страницы: 29

Бренд: Trevi Страницы: 8

Бренд: Trevi Страницы: 28

Бренд: Icom Страницы: 16

Бренд: Decatur Electronics Страницы: 45

Бренд: Roadstar Страницы: 30

Бренд: Adaptiv Страницы: 12

Бренд: JEM Страницы: 17

Бренд: Peaq Страницы: 125

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды