pulseEKKO PRO
2-System Assembly and Startup
7
2.3.2 Attaching the Sockets to the Transmitter and Receiver
Insert and tighten the two female brass antenna sockets into the bottom of the transmitter and receiver
electronic boxes (Figure 2-8). Tighten the sockets finger-tight. DO NOT APPLY UNDUE FORCE!
Figure 2-8: Hand tighten the brass sockets into the bottom of the transmitter and receiver.
2.3.3 Inserting Pins into the Antennas
Insert the two male brass antenna pins into the two threaded holes in the center of the antennas. Tighten
the pins finger-tight (Figure 2-9). DO NOT APPLY UNDUE FORCE!
Figure 2-9: Insert the male brass antenna pins into the holes on the top of the antenna and finger-tighten.
