Sensors & Software Conquest Series Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 75

background image

5-Line Scans and Grid Scans

Conquest

28

5.10 Step 10: Marking the Site

You will need to view the depth slices up and down through the total depth range in order to mark
the site. The normal process is to step down through each depth and look for linear features
which usually indicate pipes and conduits. At each depth, mark the location of the feature on the
surface using the grid as a guide. You can mark directly onto the sheet with erasable marker.
Sensors & Software also have paper grids that can be placed on the site. (Call for availability).

Each linear feature or feature where there is a dark spot on the screen should be marked on to
the surface of the area. Marking the site will obviously be dictated by the site conditions. In an
open concrete structure at a construction area site you can use chalk or a crayon to mark the
surface. In finished floor areas one may want to use a washable marker or some other type of
easily removable indicator. You will no doubt need to adapt for your specific site condition.

5.11 Step 11: Transferring Data to a PC (Optional)

The Conquest systems offer the option of transferring data to a PC for further analysis. This is
available if you selected the enhanced system option or purchased the enhanced upgrade option
after buying the base system.

Details on Exporting data are described in

Help > Tools

.

5.11.1 Compact Flash Drive Transfer

Files collected with the Conquest system are saved to an internal drive but the

Export

feature

copies data to an optional removable Compact Flash card. To transfer data copied to the
removable drive to a PC, ensure that Conquest is powered off. Then eject the compact flash
drive from the card slot under the Monitor Keypad (See Figure 2-6 on page 6) and insert it into a
user-supplied card reader connected to a PC. Use the Windows Explorer program to make a
new folder on the PC, read the removable drive and copy the data files to the new folder.

Each time Conquest data are exported to a compact flash disk, a new folder with an incrementing
number is created, i.e. EXPRT001, EXPRT002, etc. Grid Scan data are copied to the GRIDS
sub-folder, i.e. \EXPRT001\GRIDS and Line Scan data are copied to the LINES sub-folder, i.e.
\EXPRT001\LINES.

Since Conquest can collect up to 99 Grid Scans, each one is saved to a sub-folder with a number
corresponding to the grid number, i.e. CONQ001, CONQ002, etc. Therefore, grid scan data will
be found in folders with names like: \EXPRT001\GRIDS\CONQ001.

«
...
38
39
40
41
42
...
»

Содержание Conquest Series












































































Отзывы:

Нет отзывов

Похожие инструкции для Conquest Series

Бренд: Cobra Страницы: 18

Бренд: Yaesu Страницы: 43

Бренд: Simons Voss Technologies Страницы: 116

Бренд: Cobra Страницы: 27

Бренд: Albrecht Страницы: 13

Бренд: Sangean Страницы: 84

Бренд: Audiovox Страницы: 62

Бренд: Kirisun Страницы: 76

Бренд: Noblex Страницы: 15

Бренд: Radionette Страницы: 168

RTCP 991 SU RIP

Бренд: Hyundai Страницы: 72

Бренд: JINGTONG Страницы: 4

Бренд: First Alert Страницы: 12

Бренд: Velex Страницы: 11

Бренд: Roadstar Страницы: 42

Бренд: Roadstar Страницы: 46

Бренд: HYT Страницы: 53

Бренд: RFspace Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды