SENSORPROX 100R/PIN120 -
SINGLE DOOR CONTROLLER
19
12-28. Change Alarm Time When Magnet Detected
(Refer to Table 1 for OM,
tt
=00~99 sec.)
Configuration Card Command Output Mode Door time Alarm Time TTL time
/Configuration PIN
12-29. Register 2 Digit Duress Alarm Password
(PW=00~99, Defaulted PW= 00, Do not use )
Configuration Card Command Password
/Configuration PIN
Note: ‘00’ is registered as defaulted Password.
12-30. Change Alarm Time When Duress Alarm Detected
(
tt
=00~99 sec., Defaulted TTL time= 03 sec.)
Configuration Card Command
TTL time
/Configuration PIN
12-31. Test Door Open Time Set By Command "21"
12-32. Test Alarm Time Set By Command "22"
12-33. Test Alarm Time Set By Command "23"
12-34. Test Alarm Time Set By Command "24"
12-35. Test Alarm Time Set By Command "25"
12-36. Test Alarm Time Set By Command "26"
12-37. Test Alarm Time Set By Command "27"
Outputs set by command will be tested.
~
Configuration Card
Command
/Configuration PIN
