Sensor SENSORPROX 100R/PIN120, Руководство пользователя

Страница: 14 / 26

SENSORPROX 100R/PIN120 -
SINGLE DOOR CONTROLLER
14
11-5. Secure Mode
The last person to exit can change the operation of the unit from Normal Mode to Secure Mode by
entering the Secure Code of onto the keypad.
Change to Secure Mode.
The Secure Mode will revert back to the normal mode when a registered card (or PIN) is
presented/entered.
11-6. DURESS Alarm
In case of Duress, enter the 2 digit Duress Password and the door will open as usual;
however, the Duress Alarm (TTL Output) will activate an external Auto-Dialer to notify the appropriate
personnel. See section 9.7 and 12.29 for more instructions on this feature.
11-7. Chime Bell Operation
The key can be used to activate an external Chime Bell for 5 seconds, the defaulted value.
12. SETTING CHANGES
Configuration Card/PIN is required to change existing or defaulted setting values or to manage user’s access.
First, present the Configuration Card (or enter the Configuration PIN) and enter the 2-digit command code.
RF Only Mode or RF + PIN Mode PIN Only Mode
+ or +
Configuration Card Command Code
Configuration PIN Command Code
Summary Table of Commands
Command Action/Change setting values
11 Add User Access Cards (RF CARD ONLY MODE)
12 Add User Access Cards and PIN (RF CARD + PIN MODE)
13 Add User Access PIN numbers (PIN ONLY MODE)
14 Delete User Access Cards (or PIN)
21 Change Door open time when User Access Card (or PIN) is granted
22 Change Alarm time when User Access Card (or PIN) is denied
23 Change Alarm time when Try-Out error detected