Sensor Networks JAWS 2.0, Руководство оператора

Страница: 9 / 22

9
Battery Charging
Place the charger on a flat, level surface away from sources of
heat and moisture.
Plug the connector from the AC adapter into the back of the
charger and connect the adapter to the mains AC supply using
the cable supplied.
Place the battery into the battery bay ensuring that the 5-way
connector is fully seated. The LEDs in the status window will
provide status information and the charger will automatically
begin charging.
Green flashing: Battery charging
Green solid: Battery fully charged
Red: Error
Note: The battery does not charge while installed in the
controller. Follow instructions below to charge battery.
Open the battery compartment by loosening the two screws on the
controller back cover. Pop the cover up and off.
Remove the battery and insert it into the supplied charger. Full
charge time is generally 2 hours.