Sensor Networks JAWS 2.0, Руководство оператора

Страница: 6 / 22

6
Setup
1. Connect main cable to grabber. Align the red dots and push
connector in until it clicks.
2. Connect extension cable as needed. Use without this cable is
recommended as the extra cable length consumes power that
would otherwise be available for the tool.
3. Connect cable to power pack.
4. Attach push rod or other rodding accessories to manipulate
the tool into position for grabbing.
Powering the System
ON: Press in the switch and release to start the system, the
status LED will blink Green while starting. The video will
display after 15 seconds. The status LED will change to
Blue
indicating the system is ready.
OFF: Press in the switch for 2 seconds to power down the
system.
Power / Video
Cable
HD Display
/ Controller
HD Grabber