AirDistSys 5000
11 – Operator’s Manual
4
4
.
.
A
A
C
C
C
C
E
E
S
S
S
S
O
O
R
R
I
I
E
E
S
S
A
A
.
.
P
P
o
o
w
w
e
e
r
r
B
B
a
a
n
n
k
k
PowerBank is a high performance external battery pack with latch for DIN rail. The latch allows for easy
installation of the device on a tripod along with other parts of the measuring system. Includes a white charging
cable (USB to micro USB) and spiral power cable (USB-plug DC) with a length of 30-100 cm.
Technical Data:
Power port:
2 x USB DC 5V/1A
Real capacity
*)
:
7000-8500mA
Minimum supply current:
135mA
Charging port:
micro USB 5V/2.1A max
Charging time:
15 h
Long time efficiency:
300 cycles of full charge and discharge cycles will leave 85% of
nominal capacity)
*)
Capacity due to reduced efficiency when converting from battery voltage 3.6 V to output voltage 5V
(theoretical capacity of the battery is 10000-13000mAh)
Remarks:
1.
Turn off the PowerBank by disconnecting the power cable when you
are finished working. Otherwise, this may lead to rapid discharge of
the battery.
2.
Charge and discharge the device once every 3 months, if it is not used
for a longer period of time.
3.
In order to charging connect USB white cable to micro USB charge
port on PowerBank and to USB port on DC5V USB charger or
computer. If LED signal flickers, it means PowerBank is being
charged.
4.
Due to the minimal supply current, PowerBank may automatically turn
off after a few seconds in the case of smaller receivers power supply
current consumption.
5.
See picture next to how to connect the PowerBank with SensoBee
wire-less transmitter.
